Laundry room floor tile reveal....

 One of the first rooms I shared in our home is the laundry room….I absolutely love it.

I love the storage…I love the window…I love the coffee bar. I just love this space.

I’m sure when I had a house full of kids and piles of laundry I wouldn’t have loved it as much but with just the two of us it is relatively easy to keep it in order.

I love it so much that I really haven’t minded the outdated floor tile!

Much.

Truth is, the stuff kind of gives me the willies. I know this tile is the original tile from 1998 because it is identical to the tile I personally installed in the apartments I built in 1998, 1999, 2000, and 2001. Yes, personally…THOUSANDS of square feet of this stuff. And then for over 20 years I had to scrub it and repair it and look at it covered in nastiness…auuuuggghhhh!

So yes, while I love the space, the floor tile did kinda make me growl occasionally. I knew I eventually wanted to replace it. I think the last time I shared this room I showed you the flooring issue that would need to be dealt with after removing a portion of a wall.

Let’s be honest…it’s just plain ugly.

But oh the work. Tearing out old tile is NOT for the faint of heart or weak in the back.

When we demoed the master bath in my last house we busted up the old floor tile. I have never been one to paint over wallpaper or tile over tile. Take it out and start fresh.

I have only “tiled over tile” one time and it was on a backsplash in a kitchen. Never a floor.

Busting out the old floor tile just didn’t seem like something I wanted to tackle. Tasha at Kaleidoscope Living recently updated one of her girl’s bathrooms and actually tiled over existing tile in a shower.

Hum….dare I?

Yes, I dared. After a TON of additional research. I googled “tiling over existing tile” and read every article and watched every video I could find on the subject. The general consensus was that it is certainly doable as long as the tile you are tiling over is solid.

Mine was.

One thing I could not get a firm consensus on is whether to prime the existing tile. Some articles and videos said prime, others didn’t even mention it.

I decided it couldn’t hurt and might even help…so I primed. I used this product…

… and after a whole three weeks of walking on the new tile I can attest that it works (three weeks people…this is not an endorsement for longevity!!!)

I will say it went on VERY easily…just rolled it on with a paint roller. It also dries quickly and has a low odor. It has kind of a “gritty” feel to it and I felt confident it would give a good base to the new thin set and tile.

Choosing the tile….I did what I always do. I went on Pinterest and looked for “inspiration.” (This is important because sometimes I THINK I want one thing but when I see it in other's spaces I realize I really don’t like it.)

Then I went to the tile store, picked up 4-5 samples, brought them home, laid them on the floor and easily made my decision. This is important when choosing ANY element in a room…tile, paint, curtains…because the lighting in your room may alter what you see in the store.

Here you can see I first moved out the washer and drier, removed the base trim, tiled, grouted, reset and painted the trim, them moved the washer and dryer back and proceeded with the rest of the floor. Much easier than trying to wrangle two big appliances into another room!

I love the new tile!!! Now I don’t growl at the floor anymore!

I did small grout lines (I think that is the “in” thing now and so much more practical) and dark grout. It will make it easier to keep the floor “clean looking.” Except dark floors show fuzzies which is common in a laundry room…but oh well.

Tiling, whether it be a floor or a backsplash, is not a terribly difficult DIY project. A wet saw is a must so if you don’t have one, borrow one or rent one. Watch TONS of how-to videos and make sure you follow EVERY manufacturer’s instructions, even if it doesn’t make sense.

Personally I would leave wet areas like tubs and showers to the professionals. There are special “water proofing” products and techniques that will prevent future leaks…and trust me you don’t want water issues around a tub or shower. If you feel like you want to tackle a tub or shower area, make sure you do a TON of research!

TIPS!!! Pay attention to transitions between the new tile and other flooring and the bottom of the doors. Will adding an additional 3/8” make you have to cut down a door or add a transition piece?

Neither is difficult but you need to plan! I was fortunate in this space. Adding the additional tile did not affect those things. The existing tile actually sat a good 1” below the wood floors in the breakfast room and the new tile butted up to the existing transition piece nicely.

I always carefully remove the existing base trim, repair if necessary, prime and then reinstall it on top of the new tile after I have grouted. Some people add base shoe. If that is the plan make sure it will work with the existing trim BEFORE you install the tile.

I use an oscillating saw (or you can use a special trim saw like THIS one) to cut the casing around the doors at the floor. I lay the new tile down on the floor and use it as a guide to cut the trim. Do this BEFORE you start tiling because it will make a mess and you will want to vacuum or sweep well after cutting the trim. Then when you are installing the new tile you can just slip it under the casing and not have to worry about making tedious cuts!

Which reminds me…always do all your prep work (removing trim, cutting casings, etc) and then vacuum and clean the floors well before starting. I also keep a little hand broom handy just incase I need to sweep a bit while installing. DON’T TILE OVER CRUD!!!!

Remove any doors that swing into the space you are tiling…makes it sooooo much easier to move around!

Prime…I know I could not find a consensus on whether to prime, but I am going to say one should error on the side of caution. I don’t think it is necessary if you are tiling over concrete, but definitely over existing tile.

And again, ALWAYS make sure the floor you are laying it on is sound and solid. If it is not, fix it! DO NOT lay ceramic tile on a wonky floor.

If you are laying on a wood subfloor, I personally would lay down durrock, tape and mud the joints (with a mesh tape and thin set) and add the water proofing products (something like THIS). Again, maybe overkill but better safe than sorry!

Research what size trowel to use with the tile you are installing. It matters!

Research whether to use thin set or mastic with your new tile. My personal rule of thumb is regardless of the size of the tile, I always use thin set on the floor. I only use mastic on wall tiles (like backsplashes) and only if they are small tiles. If you are tiling around a fireplace, make sure the thin set or mastic you are using will withstand heat!

These are just a few of my personal tips. Before you tackle a DIY tile job, or ANY DIY project, do a TON of research online. Read articles, watch videos. Don’t rely on the kid at Lowes manning the flooring desk to give you advice.

So, another little project in the books. The old tile is still in my pantry and in the spare bathroom…maybe someday I will tackle those areas.

But for now, I am just going to enjoy my laundry room floor. It is pretty and makes me happy!

This week I begin tackling my home office. Stay tuned, it’s gonna be fun!

Merry Christmas!

So little has changed since last year so I decided to link back to a few post from last year….

Here you can check out the “Kitchen Reveal.” Lots of Christmas decor!

Here I shared my “funky bow” obsession….still love them and even made a few more this year. I have made a few for every “holiday” throughout the year!

The only real change is in the “all-season” room. I shared a few changes HERE.

I didn’t decorate this space last year for Christmas because…well, I just didn’t.

On October 1st, I lost my uncle to cancer. We called him “GUS”…because he was our Great Uncle Sam…one of the greatest. He was the 3rd of 5 siblings we have lost in the last year and a half, including my mom, his sister.

They are Stewarts….my Uncle Bob wore his Stewart plaid tie for Uncle Sam’s memorial service and the church decorated all the tables at the reception with Stewart plaid.

So in honor of the Stewart family I decided to decorate this room in Stewart plaid.

Precious. I have always loved Stewart plaid. A simple pre-lit tree with Stewart plaid ribbon and red and green ornaments.

A few plaid pillows and a throw.

Touches here and there in a room that has always honored members of my family.

Two cute little lanterns with remote controlled candles…fun!

I love that you can see the BIG tree through this window!

Here I shared the beautiful stained glass made by my mom and dad and the cool table made from wood salvaged from the building my dad worked in most of his adult life.

So it is fitting that this room honor the “Stewart” family.

Merry Christmas to you and your family. Our family has been hit AGAIN this year with Covid, so AGAIN we will have a “different” Christmas.

But it is still the MOST WONDERFUL TIME OF THE YEAR!

I will be taking a few weeks off but I will have a lot to share in the new year!

Merry Christmas and Happy New Year!!!

Another Drexel server....

Several years ago I shared a Drexel server I repurposed for my dining room…

The “breakfast room” in our new house is almost identical to our old dining room.

Including the Drexel server.

I love it…it is one of my favorite pieces.

So when I spied ANOTHER Drexel server on Marketplace I could not help myself.

As I have mentioned, I have pretty much retired from the whole repurpose/upcycle/refinish business. My hands and back just can’t take all the work that goes into refinishing pieces on the scale I have in the past.

I have refinished a few doozies…just looking back at all the pieces I have shared on this blog blows my mind. There were some pretty nasty pieces that were beautifully refinished and restored and readied for another life-time of love!

When I saw this piece I couldn’t help myself. I had to have it and I wanted desperately to work a little magic on it.

Here is my plan…MAYBE I can discipline myself enough to pick up just one piece at a time, refinish it, sell it, then pick up another…just one at a time. Just one dresser/buffet/nightstand at a time.

Hum…I’m a pretty “self-disciplined” person so I am going to start with this one.

One week into this plan…I have failed. Last week I picked up ANOTHER piece that needs a little TLC….a pretty beat up china hutch.

I have these creative juices in me that have just been screaming for a project.

So, “the plan” ….specifically for the vintage Drexel piece. Strip and oil the drawer and door fronts using THIS process. Shine up the brass hardware….no secret there, just lots of Brasso, steel wool and elbow grease. Prime and paint the “cabinet” a high gloss black lacquer.

For the china hutch…I went to Etsy for inspiration and looked around. There are some beautiful china hutches that have been painted black with the insides painted white…LOVE them.

I THINK that is what I want to do. Sometimes the process takes on a life of its own and I find myself drifting in another direction. We will see.

Right now they are sitting in my AMAZING shop. I was in there last week rearranging everything so I will MAYBE have room to make some kind of paint booth. The shop has electricity and I can easily heat and cool it for temperature control but just not sure I will have enough room since we do use it for mower/yard equipment storage as well.

I can’t wait…this is a “job” that doesn’t really pay well, but it is one I do love.

Cute Christmas door hangers...

Last week I was looking back at some old posts and realized I had never shared THESE cute door hangers I promised to share A YEAR AGO…

Most of my doors have the little candle wreaths but I thought these would be fun and different on the two spare room doors. (This one is my gift wrapping room!) Mix things up a bit!

Super simple to make…

I bought two little wood signs at Hobby Lobby…

I made some little “sprays” using materials leftover from some holidays sprays I made for my lanterns. I just bunched them together and secured them with a pipe cleaner and floral tape.

I drilled a hole in the top of the little wooden sign….

…then I just stuck the “spray” into the hole and secured it with hot glue.

Then I made a “funky bow” using the tutorial linked in THIS post and attached it to the spray.

Presto, bingo, cute little door signs!

A simple way to dress up the cute little signs and a great way to do something other than the expected “holiday wreath.”

This week we enjoyed a quiet Thanksgiving and a busy few days of decorating for Christmas. Not much has changed from last year so you can check out THIS post to get an idea of what is where. I did add a few trees…one in the all-season room and one in the den but nothing earth shattering. The all-season room got a “Stewart plaid” treatment…seems to be all the rage for the “in” plaid this year…but I am a true “Stewart” so it has more meaning. I want to add some lanterns and a few other little things so I may share that room in a few weeks.

Next week I will share my new “projectS.” Stay tuned!!! Exciting stuff!

All-season room reveal...again!

Last week I shared the new cabinet I bought for the all-season room and the changes I made to it to turn it into a giant litter box. Brian was a tad miffed that I would buy something only to hack it up for the kitties, but if you have ever had a litter box and all the mess that goes with it, you certainly understand my attempts to corral it.

The litter box is hidden away and the critter food is stored in the drawers!

One week later, it is working perfectly!

The outdoor couch I bought for this space arrived Friday night. I am always amazed that such a large piece can fit into a relatively small box…until I unpack it and start putting it together. Geez!

If I have learned anything in 57 years it is FOLLOW THE DIRECTIONS. While they may not make sense, they make sense. When they say “hand tighten only,” hand tighten.

It is in place and I love it!

It’s not near as plush and comfy as our living room couch but it is an “outdoor couch” so I didn’t expect it to be.

I was a tad concerned about the fact that it is a “canvas white” and the cushion covers weren’t zippered for easy removal in a house full of critters. Our new puppy (oh yes, we got a new puppy! To tired to share that news just yet!) managed to christen it within the first 10 minutes…muddy paws. Fortunately it cleaned easily!

The coffee table LOOKS like teak wood, but it is actually metal. Kind of chintzy if you ask me so eventually I want to get something a little better quality and much smaller…it is just too big for the space.

I am still debating the height of the kitty cabinet…I THINK I want to cut it down but I am living with it for the time being. One day the bug may hit me and I will drag it outside and hack on it some more!

For now I have a space perfect for watching the leaves and snow fall. In the winter I put out corn and bird seed so this will be the perfect spot for critter watching as well.

A few months ago I put a kitty door in one of the windows between the living room and the all-season room so the cats can could come and go without having to leave the door open.

Since this has turned into the “cat room” they will LOVE watching the critters. And no, the cats never go outside so the critters are safe.

Hopefully we will use the space now that the changes have been made…the cats certainly do!

Fireplace reveal...,

It is done.

As I mention HERE, I had several goals for this room.

The first was easy…replace the paddle fan. Check.

The second was a tad more difficult. Reface the fireplace.

Difficult only because I couldn’t “see” what I wanted which resulted in a spur of the moment “demolition” of what was there….

As I have said time and again, often what “is there” keeps us from seeing “what can be.” I see stuff on Pinterest and in magazines all the time that I love, but I can’t visualize it in my own space because what is there clutters my vision. I have equated it to trying to paint a landscape on a canvas that already has a portrait painted on it.

That is when I advocate painting the canvas white. Base neutral. Painting the piece of furniture or wall white or taking all the furniture and fixtures out of a room so you can visualize what you want rather than what is there. Even if it is a piece of furniture you plan on keeping, take it out…that way you can “see” it in a different spot or even painted a different color.

Once I did that with this fire place, I could visualize “the plan.” Rock the bottom…big beefy walnut mantel.

I shared the stone HERE.

Last week Matt and I dragged out the table saw and chop saw and went to work on the mantel. Four coats of Waterlox (I LOVE this stuff) and presto-bingo….the vision came to life. Waterlox is my new “go to” finish…a tung oil finish that gives any wood durable protection while allowing the beauty of the wood grain to shine. And it is SERIOUSLY idiot proof! Just sand, clean the entire piece with a tack cloth and wipe it on. Use 0000 steel wool and tack cloth between each coat. I usually apply 3-5 coats. LOVE!!!

I intentionally choose walnut with tons of grain and a few knots…”character.” This house doesn’t lend itself to the “farmhouse look” but I didn’t want formal and fussy either.

The final result was exactly what I envisioned…and I LOVE IT!

Here is the BEFORE (obviously last Christmas)…

And AFTER….

Sometimes we get so wrapped up in getting a project finished as quickly as possible, we fail to live with the results in our minds for a time. Trust me, you will love any DIY project sooooo much more if you will get rid of what is there and take time to live with what you think you want in your mind before you start slathering paint or ripping out walls.

Remember every space is different….just because something looks amazing on Pinterest or in a magazine doesn’t necessarily mean it will work for you. It might, but spend the time to tweek it in your mind before you jump head long into what can be a time consuming and expensive “oops.”

The fireplace makeover...Part 2...Airstone Faux rock.

The stone work is done….

…and I love it.

I highly recommend the Airstone product. At least as far as installation. It is a relatively easy product to install. Lightweight and exceptionally natural looking.

When we fire up the fireplace in a few months I will let you know how it holds up to heat.

This stone product would work well for a kitchen backsplash, fireplace face or a covered porch area. It SAYS you can use it for exterior application…I can’t attest to that since I did not use it outside.

I think this is a relatively easy DIY project.If you choose to install this product find a tutorial that works for you. More importantly though, FOLLOW THE DIRECTIONS!!!!

I do have a few tips.

Start at the top. Then the sides…them the bottom. That may seem backwards, but it is the way to do it. Start at the top by adding a temporary level brace….I just used some scrap 1x4. I let that dry over night, then did the same on each side, then the bottom. The Airstone mastic sets up fairly quickly.

I used pennies as spacers between the floor and the stone. I do this because wood swells and moves and you don’t want the rock sitting on something that has movement. Same would apply if you were using it as a backsplash…don’t set any wall product (faux rock, tile, marble, etc) directly on a top or floor.

Use a tile saw to cut it. I have a wet saw so if you do not, rent one. Makes easy, precise work of tricky cuts.

Pay attention to how to apply the mastic…it’s like frosting a cupcake, not buttering toast.

The tub of mastic specific for the faux stone SAYS it does 30 s.f….it does not. Maybe I “iced” to thickly but I would suggest buying more than you think you will need…you can always return it.

Layout the rock on a template or floor before applying it on the wall and number each piece so you know how to property transfer it to the wall. Also, make sure you pull from different boxes…mix it up. Each box has several different “colors” and “textures”and each box may come from a different run…so you want to make sure you mix it up!

I used the “edge” pieces around the face of the fire box…I think it looks neat.

I should have wrapped it around the entire bump out. I would have loved to take it to the ceiling. I am still debating on adding a hearth.

But the “coulda, shoulda, woulda” is always a brain worm until the project is finished.

I didn’t want to take it to the ceiling because I don’t want to remove the crown then have to paint the entire ceiling. I don’t think I want to add a hearth because this is a small space and I don’t want to crowd the space. I didn’t wrap it around the entire wall because, well, I just didn’t.

Hopefully when I get the mantle on, it will all come together.

So the mantel. I think I thought I knew what I wanted but now I not so sure.

My plan is to make a beautiful walnut mantel…smooth…perfect grain…low sheen. Now I am debating on a more “rustic” look with a lighter finish.

What to do, what to do.

As usual, I have searched Pinterest and found dozens of looks…I like them all!

This house style really does not lend itself to that “farmhouse/rustic” look so I think I am going to go with a more smooth, low sheen look. Sometimes you have to “read the room” when making decor decisions.

I bought some walnut boards (dang that stuff is expensive!) and specifically picked pieces with lots of grain and a few shallow knots. Just a smidge rustic but still the beauty of walnut. I know if I apply Waterlox (like I did here with my kitchen cabinets) it will have a dark finish. And I think I am okay with that. The stone is light and I think the dark walnut will be a nice contrast.

Now I am just waiting on my son to have a day we can work on his table saw. I shared HERE about my phobia of table saws. I bought him one for Christmas last year so I have one available and have a “saw buddy.”

Hopefully next week I will have a beautiful new fireplace to share!

The fireplace project...taking it to base neutral!

As I mentioned when I first shared the den, one of my “eventual projects” was to reface the fireplace.

But as I have said before, often “what is there” blinds us to “what can be.” So the absolute best thing you can do with any mentally blocked project is to take it to “base neutral.” Whether it be a room, a dresser, a fireplace….take out what you don’t want or paint it all white…and start with a blank slate.

After months of being mentally blocked, I took a hammer and crow bar and took it to “base neutral.”

I love that this house has two fireplaces…and the one in the living room is fine ….for the time being….

(Yes, fall puked in my house!)

But the den is a “less formal” space and I really want something less formal looking…like stone and a big beefy wood mantel.

I’ve dropped a few “inspirations” into a computer file…

…and I have found several looks I like on Pinterest.

I like the look of stone or brick to the ceiling but that would entail removing the crown, which would then mean I would have to paint the ceilings throughout the entire space…kitchen, den and breakfast room. And that is just not a project I want to even think about at this time.

My plan is brick or stacked rock and a big beefy wood mantel…preferably walnut. I have been researching the Airstone product (sold at Lowes) and if I go with the stone look, I may give it a shot. But I also like the brick look so I am looking at brick tile as well….

That’s the plan…I think…maybe…

I don’t know. What I do know is it will be much easier for me to visualize what can be now that what was is gone.

I better get to visualizing because as you can see, I will need both mantels for stockings in about two months!!!

Coffee Bar...

When I looked to Pinterest for inspiration for a coffee bar I realized that there are some super serious coffee connoisseurs out there. I just wanted a nice organized place for a few coffee necessities.

My stove top area in the kitchen is a bit tight for a “coffee station”…

…but we managed because I have TONS of prep space on my island. Regardless, I wasn’t happy with having my coffee maker in this area….and I didn’t want to have a full sized coffee pot taking up even more space so we would have to remake coffee all morning in our little 4 cup maker.

I decided to utilize a corner of the counter top in the laundry room for a “coffee station.”

Even though we make coffee every morning, the distance from the kitchen trash can and water source was almost equal so it really was no biggy to put it in there vs. on the kitchen counter.

Right now I am on a quest to use up some of the wood and materials I have accumulated over the years. It would have been real easy to go out and buy new materials to make shelves but I decided to get resourceful.

When I remodeled Katie’s room eons ago I removed the black floating shelves she used as her makeup station….

(Man my photo skills sucked!!!!)

I’ve kicked those things around for YEARS thinking I would eventually use them.

They weren’t the size I wanted for my “coffee station” and not even the style. But I decided I would try to make them work.

The first thing I did was cut them down. Not difficult since they are constructed out of fake wood and cardboard. I did have to take a metal grinder to one of the metal support brackets to make it shorter, but that was seriously no biggy.

I did add some wood support inside the corners of the cut down shelves because my next step was to clad them in wood.

I had some leftover “bead board planks” from another project…similar to this…

…so I used that to clad the tops and bottoms of the shelves (just glue and a few nails). Then I used some 1”x3” pine boards I had for the fronts and sides. A little stain…a little polycrylic to seal.

Repurposed floating shelves…they didn’t cost me a dime because I used scrap materials I had on hand.

My goal was “rustic” shelving…I think I accomplished that.

I did purchase a few new canisters…one for coffee, decaf, and cocoa.

The old silver tureen has held my filters for years…love it.

I found this cute little office supply thingy…originally labeled for paperclips, rubberbands, erasers, stamps etc.

I decided it would be perfect for all the different sweeteners my family insists on…God forbid they use the one I use. I relabeled each space for my purposes.

A fake plant. (BTW I keep reading fake plants are a decor faux pas…ask me if I care!)

We did purchase a larger coffee pot.

Again, this space is right off the kitchen so it really isn’t a bother. I like that it freed up a little bit of kitchen counter space.

I would like to add that 1) I now have a HUGE laundry room and 2) it is just Brian and me so rarely are there piles of laundry demanding my attention. I can see where some may not have the room or desire to use the laundry room for this purpose! But for us, it worked out perfectly.

I am a HUGE proponent of looking to Pinterest for inspiration…but sometimes we get a little intimidated by what we see online and forget we don’t NEED all that froo-froo or even have the space for it….

Don’t get me wrong…I think these spaces are amazing…but for YOU are they realistic? Hopefully my tiny little corner will inspire you to “think outside the box” if you need to create a space. Know that you don’t need a huge space for a basic coffee bar if you just need a place for a few basics.

Making a table or bench top...

One tool I wanted for years was a “biscuit joiner.”

One of the many things I love about my kids….when I ask for a specific tool for Chirstmas/birthday/Mom’s Day, they listen. So several years ago I got a biscuit joiner for Christmas!

This little tool has allowed me to make a few things I otherwise wouldn’t have been able to make. It allows me to join together several boards to make a larger board. A necessity if you want to make benches or table tops.

Let me give you a few examples….

The first was this bench….

Source

I was able to join together the three 1”x6” boards and the ends to make a strong top.

Brandon and Taylor wanted a plain pine table and bench for their new house. I guess they could have spent a fortune like we did for a custom made table but that isn’t really an option for a young couple.

So we went to Lowes, picked out some straight, nice boards with good grain and used the biscuit joiner, glue and clamps to create a table top and bench top.

After some serious construction, a LOT of sanding, a polycrylic clear coat, and some nifty bases, they have an AMAZING table and bench!

Last year I went looking for some shelving…I found one I absolutely LOVE. It was from the same company that built our dining table so I knew the quality would be amazing….but the price tag was just a tad too steep!

SOURCE

I love everything about this shelving unit….the look, the style, the quality.

So I went looking for a less expensive option. I found one I thought was okay on Overstock.

Waaaay less expensive…and for obvious reasons. The frame is metal vs welded steel and the shelving material is MDF vs. beefy solid wood.

The look and style is very similar…almost identical sizing…but the MDF shelving HAD to go. I knew immediately I wanted to replace them with solid walnut.

It has only taken five months to get around to this project.

The biscuit joiner was a life saver.

Walnut is a pretty expensive wood…and finding pieces wide enough for the needed 12” shelving was pretty much impossible (without a serious outlay of cash.) What I did find were 7”ish board we ran through my son’s table saw and joined together….

Using a biscuit joiner is NOT difficult…just take your time and follow the directions.

One little trick I did learn was how to mark the joints so they lined up perfectly. Just put your two boards together then run a mark across the joint….

Then just line the joiner up with the mark and plunge away…the joints will line up perfectly!

Always dry fit everything to make sure it all lines up perfectly before you apply glue….

Apply glue and clamp….

Joiners are NOT difficult to use. Just follow the directions and watch lots of YouTube tutorials.

I sanded each piece with 220 grit sand paper, tack cloth and sealer.

I used Waterlox as a sealer…no stain…same stuff I used on my kitchen cabinets and I have been extremely pleased with it!

BEFORE

AFTER

BEFORE

AFTER

BEFORE

AFTER

I was able to take a shelving unit fit for a dorm room and turn it into a beautiful accent piece!

LOVE!