Eastlake chair makeover....

A few weeks ago I questioned the need to paint an antique....seriously, is it a cardinal sin?

Most "purists" would never take a paint brush to a walnut chair or mahogany dresser...I get it...I was one of them.

But sometimes I have to bite the bullet and go with the flow!

I bought two Eastlake chairs at an auction a few months ago. Naturally, I neglected to take good "before" pictures because, again, I am a bad blogger.

One had arms, usually referred to as the "caption's chair"...you can get a peek of it next to the old couch (finished the couch last week...hope to share soon!)

The other does not have arms. It has been at 410 Vintage since I bought them.

I decided to give the caption's chair a little makeover, knowing that a true "antique purist" would stroke. But my general rule is...if changes will enhance the piece and give it another life, go for it! Keep in mind, I always do as much research as I can to make sure I am not slathering paint on a valuable piece. Eastlake pieces have some value, but right now the market in their original condition are pretty slim in our area. (Now MCM pieces...that's another story!)

These two old chairs didn't have much of a life as they were, so...

I chalkpainted the frame....

....distressed it a tad to highlight the Eastlake detailing, applied a clear coat, reupholstered the seat and back with drop cloth and added a little graphic from The Graphic's Fairy for a touch of whimsey!

The seat of the chair was in pretty good shape, but the back needed new upholstery weaving and padding. And as with most old chairs the arms needed to be glued and clamped. No biggy, but again, ALWAYS make needed repairs before investing your time and money on paint and upholstery!

It sold the day I took it in.

I've decided to give the other chair a makeover as well....fortunately warmer weather is just around the corner!

Info

2 Comments

Mid Century Chair Makeover and the trick to sewing vinyl!

Recently my mother has been on a purgefest. As a result, I have inherited a few beautiful pieces of furniture and several sets of family china.

This little table was one that belonged to my paternal grandparents and is the catalyst for my entry makeover that I will finally share next week.

Not really my style, but again, it combines two of my first loves....heirlooms and walnut!

This little chair belonged to my maternal grandmother...so when my mom offered it to me I honestly could not get it in my truck fast enough! THREE of my first loves....heirlooms, mid century AND walnut!

(Again, excuse the quality of the picture...this is from my phone!)

As much as I would love to keep it, Katie tagged it for her condo. Since neither of us were real keen on the finish or the fabric, I immediately put her to work stripping and oiling the frame using this process and finding a new fabric for the cushions.

After looking online at similar mid century chairs, she decided to go with a "leather look" white vinyl. Beautiful, but the fabric has one serious drawback.

It wouldn't go through my old sewing machine! (When I say old, I'm pretty sure I bought it before my oldest son was born...28 years ago!)

I have used vinyl and naugahyde before, but always for recovering chair seats...like these mid century dining chairs! I had never actually used it for a sewing project. I discovered that the vinyl-like material was NOT going to glide through a sewing machine, which posed a real problem when one needs to make new covers for a cushion, including all the piping!

My uber smart, engineering minded daughter came up with a perfect (all-be-it tedious) solution. Wax paper!!!! I encased the strips of material I was using to make the piping in strips of parchment paper (that's what I had on hand and it worked just as well!), and it went through the machine like butter!!

Since the vinyl had a fabric backing, it was not an issue to sew the cushions together since I was sewing the fabric front to front...so the back of the fabric was what was feeding through the machine. The only real problem was when I was making the piping because I was having to sew on the top of the fabric....that is where the parchment paper came in handy!

I covered the old foam with new batting just to give the cushions a little extra loft! Eventually Katie wants to add two little "button tufts" to the back cushion!

After all the tedious machine work, the cushions turned out beautiful!

Katie has stripped and oiled her new coffee table, I built a little entertainment cabinet and coffee bar and we still have another little tufted barrel chair that needs to be reupholstered. Move in day is this weekend so we may not have everything done but we are getting there! I have been buying kitchen ware at auctions and thrift stores and their kitchen should be well stocked! Exciting time for my baby girl!

And when we get done with all our little projects, they will have one groovy pad! (did I just show my age...lol!)

Until next week when I FINALLY share my entry makeover....

Info

3 Comments

Another mid-century dresser makeover...

If you have followed along for any amount of time, you know I have a "thing" for mid-century furniture...and walnut.

I just love the clean lines of the pieces and how sturdy they are. You can not buy furniture today that is as durable and sturdy as many of these 50-60 year old pieces. Well, I guess you can, but you will pay a pretty penny for them!

And walnut? Well, in my opinion, there isn't a more beautiful wood grain out there.

A few months ago I featured a beautiful mid-century dresser I refinished and put in "Mitchell's room." I knew it was a tad big for the room, but I just could not resist.

As strange luck would have it, I was cruising Craigslist and found the matching chest. It just so happens that the people who owned the flea market where I originally purchased the dresser were selling the matching chest. Wow. What are the odds!

I actually ended up paying a tad more for the chest than I did the dresser...and it was in a little rougher shape structurally.

One of the big "boo-boos" on this piece was some pretty substantial chipping on the veneer of the top drawer corners....

Several of the drawers had missing or broken bottom "glides" and one had been VERY poorly repaired! (Hence, THIS rant!) And one of the legs was a little whomper-jomped. (Technical term for loose and wobbly)

I can not stress enough how important it is to make proper repairs. People, wood glue and clamps are your friend! I could do a tutorial a day on properly repairing furniture, but truth be told, there are a billion outstanding tutorials online for every imaginable repair. No, DO NOT use nails to secure dislocated dove joints. No, do not use silicone to try to put a drawer back together. No, do not put sheetrock screws in the leg of a dresser that originally had a bolt and clamp. If you don't know how to properly fix it, GOOGLE IT! (or email me...I love telling people what to do!) Seriously, it isn't hard to repair furniture, but if you do it wrong, I promise it won't last...and all the paint and refinishing you did to make the piece "pretty" will be a waste of time!

So, the first thing I had to do was repair and rebuild a few drawer glides. Then I had to fix the leg which required removing the old bolt, filling the hole with wood and glue and then replacing the bolt. Then I had to figure out what to do with the chipped drawer fronts.

Since I had refinished the drawers on the dresser, I really wanted to refinish this piece to match. Since there is really no good way to "rebuild" veneer and then stain it to match, I decided to remove the damage by creating a little "radius" on the corners. Probably not the best thing to do on a style known for it's clean, straight lines. I contemplated just cutting the corners at a 45 degree angle...but naaaaaa.

My goal was to improve the aesthetics a tad and also prevent further damage to the veneer in the future.

I used a paint can to draw a "radius" on the corner....

...then I used my mouse sander with 220 grit paper to carefully sand away the damage and round the corners. This is what I call "sculpting" a piece and it takes time and patience. When sanding, always start with a very smooth grade of sand paper (220-330) and only use a rougher grit if it is absolutely necessary. And ALWAYS sand with the grain!

Other than the chipping, the veneer was in pretty go shape and still intact. If I had used a rougher grit, I risked chipping or damaging the veneer further.

When it was all said and done, it turned out pretty well.

After making all the repairs, I stripped the top, drawers and legs using 1/2 acetone and 1/2 lacquer thinner and steel wool. I knew I wanted to paint the "cabinet" like I did the dresser, so I taped and papered off everything that was going to be left "natural" and sprayed it will Kilz, sanded smooth, wiped it down with a tack cloth, and sprayed it with my favorite spray paint.

The top, drawer fronts and legs were left natural. I didn't apply a stain because I love the look and color of walnut with nothing but clear oil.

I used the same process I use on all stained or natural wood. First I hit it with 0000 steel wool (always WITH the grain) just to smooth it a bit. Then I applied 3-4 coats of Formby's tung oil finish, rubbing it with 0000 steel wool and a tack cloth between each coat.

In all honestly, I really do not need two large dressers in this room. It is just the "guest room" now. But I really can't part with either of these pieces! They are just too beautiful!

Don't turn your nose up at old pieces that need a little time and attention. In the end, if you do it right, they will be well worth it!

Info

8 Comments

Walnut MCM dresser makeover...Part 2!

You can see "Part 1" of this makeover here...a tutorial on stripping and oiling these amazing pieces!

Okay, I have to admit...EVERY time I work on one of these walnut pieces, two things happen...I fall madly in love with it and I am reminded of how much I LOVE walnut!

This little table is a prime example!

Solid walnut and an absolute true treasure! It certainly didn't LOOK like a treasure when I brought it home, but with a little time and effort, these pieces can become breathtaking additions to any home decor.

I know painted furniture is ALL the rage right now and I agree whole-heartedly that there is indeed a time and a place for painted furniture. My decorating motto...if you can ENHANCE the piece by painting it, go for it!

Some people aren't real keen on stained furniture...and that is okay. But I believe every decor needs the warmth and beauty of a quality natural wood piece...whether it is a table or chair or whatever! Not every piece needs to be painted and no decor should have ONLY painted furniture. Of course, no decor should have ONLY stained furniture either...even I throw in painted pieces here and there...probably not enough for some people's taste, but I do like to "lighten and brighten" occasionally. I painted my bedroom furniture and my office desk and even the little side table in my den. But you may note one common element on all these pieces...I left a little bit of natural wood! (Wow, looking at these old posts I realize my photography skills have come a long way! Still a ways to go, but definitely better!)

I decided to go with both paint and natural wood finish on this dresser. I like the way the painted "box" seems to frame the wood drawers! In my opinion, the results are A.M.A.Z.I.N.G!

So get ready for a BUNCH of pictures...because I am loving this piece!!!!

As I mention in the first post, the top had some pretty serious ink stains...

With a little "chemical" magic, gone!! When you find yourself faced with wood stains, hit the internet and search for a chemical solution. Trust me, sanding is NOT the answer, especially if you are working with veneer.

Can you even believe that this.....

...could become this. No stain...just a simple strip job and 4 coats of tung oil finish! Walnut in all it's natural glory!

I put this dresser in my oldest son's room. He doesn't actually LIVE here, but he still has a lot of stuff here. His room serves as a guest room and a place to keep all his "stuff." The other kids call it the "museum"...trophies, jerseys, plaques, certificates..high school and college mementos covering pretty much every square inch of the wall space.

Sooooo...it was time. Time for a fresh coat of paint. Time to box up most of the "stuff." Just time.

So later this week I will share his room makeover.

Want to know a little secret? For the first time ever I didn't stress over paint chips trying to pick the perfect paint color. I chose a color that everyone has been raving about on Pinterest and decor blogs. I literally called the paint store and told them to mix up 2 gallons, sight unseen...and I LOVE it!

I can't wait to share!

I am sharing this project with Christine at MustLoveHome.com as well as all my favorite Link Parties!

You can see the full room makeover here!